Maximum Allowable Working Pressure : 25 ALBCEEL5OoLther ProductsMmmKmmCmmBmmAmmLmmOther Products“Booster” for Nitrogen Gas BoosterThe “Booster” can be incorporated in a hydraulic unit and connected to a nitrogen gas cylinder on the gas side to generate high pressure gas.A “Booster” used in the nitrogen gas booster is treated as a “reciprocating compressor” in accordance with the High Pressure Gas Safety Law, Japan.In line with the High Pressure Gas Safety Law, Japan, a “reciprocating compressor” for the nitrogen gas booster is offered after passing a high pressure gas production facility inspection.The customer is recommended to make a hydraulic unit for the nitrogen gas booster with reference to the circuit diagram shown on the right.Seal material : TeflonPressure Gauge : 50 Capacity : 1,000 m3/dayMPaHydrostatic Test Pressure : 37.5 MPaGas Name : Nitrogen GasMPaSpring Loaded TypeSafety ValvePressure GaugeCheck Valve DevicePiston Type AccumulatorHydraulic Pressure UnitφDo□M□K114※ Dimensions without tolerance indication are for reference. Please confirm the latest dimensions with the actual product or its drawing.※ A “Booster” is a product that combines a piston type accumulator and a check valve. The fluid may enter the gas side depending on the operating conditions. Failure to remove the fluid from the gas side may result in the inability to obtain a sufficient flow-out speed.Item NumberXN-P25MP-LL5-XXN034XN-P25MP-L10-XXN034Nominal Gas Volume10MassLommkg116518810+801,006+80146714216.32422822applicable Clamp(6081C215)Domm684510A(M10×35)FunctionDimensional TableDimensional Drawing
元のページ ../index.html#115