Toosl( )37nepOevlaV Pressure Regulator Adapter for Pressure Regulator Hose Valve102Inlet Connection (IN) Outlet Connection (OUT) Maximum Allowable Working Pressure0 – 40 MPaW22-14 Cap Nut20 MPaPressure RegulatorG3/835 MPaItem Number6084YR5062R11182323Secondary Side Pressure GaugeIndicating the adjusted pressure←OUT（Accumulator Side）Item NumberCountry Nitrogen Bottle Connection Port E Maximum Allowable Working Pressure6AD023022CJapanGas Charging 3-Way ValveHose ValveItem Number6XN-HV35MP-F03-F03Primary Side Pressure Secondary Side Pressure0 – 40 MPaPrimary Side Pressure GaugeIndicating the nitrogen gas cylinder pressure←IN（Nitrogen Bottle Side）Pressure Adjustment HandleSpecificationW23-14Gas Charging HoseInlet Connection Outlet Connection Maximum Allowable Working PressureG3/820 MPa(55)G 3/8(68)W22-14 External ThreadG 3/8AccumulatorNitrogenBottlePressure Regulator Connection Port W22-14Nitrogen Bottle Connection Port EWhen charging an accumulator with nitrogen gas, using a pressure regulator is recommended.A nitrogen gas cylinder pressure higher than the maximum allowable working pressure of the accumulator or gas charging tools may cause damage to the equipment.The adapter is used to connect the pressure regulator and a nitrogen gas cylinder.It is mainly used for the connection of nitrogen gas bottle in West Japan and pressure regulator.※ The adapter can be also be used with a gas charging hose (see page 100).This valve is used to connect the gas charging 3-way valve and the gas charging hose.Hose valve enables to open/close the valve at hand by connecting to the gas charging 3-way valve.It is useful when the accumulator to be charged with nitrogen gas is far away from the nitrogen gas cylinder.
元のページ ../index.html#103