G－ ※ 1PackingPressure GaugeConnection PortG1/4AccumulatorConnection Port ANACOLGas Charging HoseConnection Port G3/8Gas Charging Tools KitItem Number of Kit① ①Accumulator Connection Port AG1/4No Gas Charging 3-way valve is required when the SG Valve is available.※1. It cannot be packed in dedicated tool box.The gas charging tools kit including in this gas charging 3-way valve is packed in a cardboard carton. It is for an 85 MPa accumulator, not sold as an above kit item.6S3G03X03SpecificationMaximum Allowable Working Pressure35 MPaG3/850 MPa8V10.95 MPaW22-1435 MPaItem Number of Single item6M3G026H3G036L38V16M3W22PressureRegulatorNitrogenBottleG3/885 MPaPressureGaugeGas Charging3-way ValveGas CharginghoseAccumulatorFilter① Gas Charging 3-way Valve Gas charging hose connection port has a filter function to remove trash and dust in a nitrogen gas cylinder and/or Accumulator gas charging or checking of gas charging pressure requires a special gas charging tools kit. (For the accumulator with SG valve, only a hose and an adaptor are required.)●Do not operate the accumulator with a gas charging 3-way valve attached.∙ Operating the accumulator with a gas charging 3-way valve attached causes gas leakage, defective operation and bladder broken.∙ For measuring the pressure at all times, please use the SG valve.a Gas Charging Hose, etc.③ Gas Charging Hose ④ Adapter① Gas charging 3-Way Valve ② Pressure GaugeT o o l sA gas charging 3-way valve, a pressure gauge, a gas charging hose, and an adapter are contained in a dedicated tool box.The dedicated tool box can accommodate several cap wrenches, pressure gauges and adapters.Note that the gas charging hose longer than 5 m is packaged in a cardboard carton.The item number for the standard kit is shown on page 101.99CautionExplanation of Item Number6-②②-④66666GHTWGGG① ①②②③ ③③ -Gas Charging Tools
元のページ ../index.html#100