We, NACOL are please to inform you that we newly completed the Design Registration of AS 1210
(Australian Standard) for some accumulator models on January 30, 2013, so we are able to provide
you the below mentioned accumulators. The following accumulators will be able to use in Australia:
Newly completed the Design Registration Accumulators:
Series | Acc. Model No. | Max. Allowable Working Pressure (MPa) |
Gas Volume (L) | Material of Acc. Body | |||||
A | A110-5~16 | 11 | 5~16 | Stainless Steel 316L | |||||
R | R130-20~63 | 13 | 20~63 | Stainless Steel 316L | |||||
Y | Y70-60 | 7 | 60 | Stainless Steel 316L | |||||
N | N70-80~120 | 7 | 80~120 | Stainless Steel 316L | |||||
N | N70-160 | 7 | 160 | Stainless Steel 316L | |||||
N | N210-160 | 21 | 160 | Carbon Steel |
The following accumulator models are that NACOL completed the Design Registration of AS 1210
(Australian Standard) before and is able to provide:
Accumulators which NACOL completed the Design Registration before:
Series | Acc. Model No. | Max. Allowable Working Pressure (MPa) |
Gas Volume (L) | Material of Acc. Body |
A | A210-5~16 | 21 | 5~16 | Carbon Steel |
N | N210-20~60 | 21 | 20~60 | Carbon Steel |
Y | Y210-60 | 21 | 60 | Carbon Steel |
N | N210-80~120 | 21 | 80~120 | Carbon Steel |
When you have an accumulator application with AS 1210 (Australian Standard), please make contact with Sales dept. at NACOL.

Nippon Accumulator Co., Ltd. TEL: 81-54-367-1252 (Direct to Sales) FAX: 81-54-367-1951