⑧SPECIFICATION OF SHELL / SURFACE TREATMENTL-Stainless Steel (Material: SUS304)X-Special Specifications⑨Oil Port Thread Specification or Special SpecificationM*10**③SERIESA-A SeriesH-H SeriesN-N SeriesR-R SeriesY-Y Series④Maximum Allowable Working Pressure①APPLICABLE INSPECTION/STANDARDH-JAPAN High Pressure Gas Safety Law (Japan)F-JAPAN Industrial Safety and Health Act (Class-2 Pressure Vessel)M-U.S.A. ASMEA-AS1210N-NACOL (Manufacturer’s) InspectionX-Speciall Inspection※1 Some models may neither be covered by the standards nor supported by NACOL (Manufacturer).⑨2⑨4⑨M⑧L⑦D⑥P--⑤5⑤L⑤L--④P④M④1④1⑤NOMINAL GAS VOLUME⑥SPECIFICATION FOR TOP CAP & GAS CHARGING SIDEP-Dynac Valve (G thread)(Material: SUS304)X-Special Specifications⑦SPECIFICATION FOR OIL PORT SIDED-Stainless Steel (Material: SUS304)X-Special Specifications②BLADDER COMPOUNDN-Standard Nitrile Rubber (NBR) H-Nitrile Rubber for High Temp. Use (H.NBR)L-Nitrile Rubber for Low Temp. Use (L.NBR)F-Butyl Rubber (IIR)E-Ethylene Propylene Rubber (EPDM)C-Chloroprene Rubber (CR)G-Epichlorohydrin Rubber (CHC)V-Fluorine Rubber (FKM)※2 Depending on the material, there is a vol-eMaximum AllowablepWorking PressureahS－1342073826941261993736853656848961,1621,5063756949061,1721,5166949061,1721,5166088631,3151,3226088631,3151,322－123123123123128128128128169169169169169164164164164164164164164164230230230262230230230262ABBBBBBBBBBBBBBBBBBBBBBCCCCCCCC888881313131313131313137777777777XN-N50MP-LL1-HN-A11MP-LL5-HN-A11MP-6.3-HN-A11MP-L10-HN-A11MP-L16-HN-A20.6-LL5-HN-A20.6-6.3-HN-A20.6-L10-HN-A20.6-L16-HN-R8MPA-L20-HN-R8MPA-L32-HN-R8MPA-L40-HN-R8MPA-L50-HN-R8MPA-L63-HN-R13MP-L20-HN-R13MP-L32-HN-R13MP-L40-HN-R13MP-L50-HN-R13MP-L63-N-H13MP-R32-N-H13MP-R40-N-H13MP-R50-N-H13MP-R63-HN-Y7MPA-L60-HN-N7MPA-L80-HN-N7MPA-120-HN-N7MPA-160-N-H7MPA-Y60-N-H7MPA-L80-N-H7MPA-120-N-H7MPA-160-Standardume that cannot be produced.Item Number7 – 50 MPa1 – 160 LNominal GasVolumeMasskgL149265306.340101657445526.37110102162053713284409950631217720104321234050146179631043212340146506317912760156802081201602941276015680208120160294MPa5011111111019M42M42M42M42M42M42M42M42M50M50M50M50M50M50M50M50M50M50M50M50M50M50M60M60M60M75M60M60M60M7520.6(21)※320.6(21)※320.6(21)※320.6(21)※3Domm 167190.7190.7190.7190.7216.3216.3216.3216.3244.5244.5244.5244.5244.5244.5244.5244.5244.5244.5244.5244.5244.5244.5355.6355.6355.6406.4355.6355.6355.6406.4*-Oil Port Connection Thread Type and Thread Size9-High Pressure Gas Equipment Test Applied*-Special SpecificationsALBCFHGmmmmmmmmmmmmmmmm466+12323Hex.540574+123900647+124630822+1263801,134+129500577+153930650+154660824+1564001,136+159520921+2371601,240+2301,0351,452+2301,2471,718+2301,5132,062+2301,857921+2371601,240+2301,0351,452+2301,2471,718+2301,5132,062+2301,8571,240+2301,0351,452+2301,2471,718+2301,5132,062+2301,8571,272+1701,0881,527+1701,3431,979+1701,7952,068+2001,8701,272+1701,0881,527+1701,3431,979+1701,7952,068+2001,87016585858585858585878787878787878787878787878788585859985858599※3 For products certified according to NACOL (Manufacturer's) Inspection, Japan, the maximum allowable working pressure is 21 MPa.※4 High Pressure Gas Equipment Test shall be applied when following the High Pressure Gas Safety Law, Japan.※5 Dimensions without tolerance indication are for reference. Please confirm the dimensions with the actual product.D11201602002002501602002002502504004007001,0002504004007001,0004004007001,0004004001,0001,0004004001,0001,00090909090909090909090909090909090909090909090909090909090909090575757575757575767.267.267.267.267.267.267.267.267.267.267.267.267.267.277777792.577777792.5Explanation of Item Number (For details, please refer to p. 27-30.)①②-③HN-ADimensional Table
元のページ ../index.html#78