⑨4⑨0⑨R⑧N⑦A⑥C--⑤2⑤L⑤L--④5④9④.④0⑧SPECIFICATION OF SHELL / SURFACE TREATMENT③SERIESE-E Series④Maximum Allowable Working Pressure①APPLICABLE INSPECTION/STANDARDN-NACOL (Manufacturer’s) Inspection②BLADDER COMPOUNDN-Standard Nitrile Rubber (NBR) ⑤NOMINAL GAS VOLUME⑥SPECIFICATION FOR TOP CAP & GAS CHARGING SIDEC-Core Type Gas Valve⑦SPECIFICATION FOR OIL PORT SIDEA-Carbon steel with zinc plating (standard)D-Stainless steelL24AB※4 Nitrogen gas charging, inspection, or pressure adjustment requires gas charging tool kit. Please refer to page 99 for further information.Standard paint coating for E series is as follows:Outside Surface: -Paint:Heat hardening Type Acrylic Resin-color:Munsell Hue No. 5GY9/1⑨Oil Port Thread Specification or Special SpecificationR0**Fixing Tools71N N-E0.95-LL2-CANR04N N-E0.95-LL4-CANR04※1 Dimensions without tolerance indication are for reference. Please confirm the dimensions with the actual product.※2 Please use E Seriel Accumulator at normal temperature.※3 The expiration date for use of E series accumulator is for 10 years after production.Item NumberGas Charging Tools Kit (※4)Hose Extension AdapterHose ValveAccumulator ClampBase Mounting PlateSeriesMaximum Allowable Working Pressure MPaNominal Gas Volume LGas Charging Tools0.95 MPa2 L, 4 LMaximum AllowableWorking PressureShapeMPa0.950.95p. 99p. 101p. 102p. 91p. 92SPECIFICATION OF SHELLInside SurfaceN-Standard MaterialZinc Phosphate (Carbon Steel)4-Oil port thread size R1/2*-Special SpecificationsNominal GasVolumeMasskg3.44.4Domm101.61276ADG03022 (Maximum Allowable Working Pressure: 29.5 MPa)6XN-HV35MP-F03-F03 (Maximum Allowable Working Pressure: 35 MPa)L1L2ABHGE24——mm389418mm348377mm2424mm17176GT **** *** *0.95Outside SurfacePaint coatingTreatmentSERVICE FLUIDTap water, Sea waterPetroleum Based Hydraulic Oil and otherD1mm150150mm9090mmHex.85Hex.856081C128Accessories/Tools/Spare PartsExplanation of Item Number (For details, please refer to p. 27-30.)①②-③NN-EDimensional Table
元のページ ../index.html#72