NACOL_E_2024_04
31/130

⑥Specifications For Top Cap & Gas Charging Side ⑦Specifications For Oil Port Side⑧Specifications for Accumulator Body⑨Thread Specification of Oil Port or Special Specification.封 印SEALED封 印SEALED封 印SEALEDSelect the item number code corresponding to the accessories, material, and top cap type on the gas charging side.Standard TypeTwo Pieces TypeStainless SteelG1/4G3/8ImageSelect the item number code corresponding to the required flow rate and service fluid.Standard (Internal Thread)Carbon SteelStainless SteelBody: PlatingPoppet Valve: Stainless SteelImageSelect the item number code corresponding to the accumulator shell material and inner/outer surface treatment specifications that suit the operating environment and service fluid.Provide corrosion protection suitable for the installation location.Body Material/Inside & Outside SurfacesPaint SpecificationPhosphate Treat-ImagePetroleum Based Hydraulic Oil & Other FluidWater – Glycol FluidStandard Paint Specification Paint Coating: Heat Hardening Type Acrylic ResinCoating Color: Munsell hue 5GY9/1Standard Plating Specification Plating: Electroless nickel plating (repair painting may be applied to the outer surface).· Standard items have three-digit showing the thread specification of the oil port valve or connection size of the flange.· "X" in the item number means special specification and comes with three-digit numbers. Please contact us if you have any questions.Dynac ValveSpring Loaded Type Safety ValveSG ValveDynac ValveSG ValveFuse PlugDynac ValveSpring Loaded Type Safety ValveSG ValvePressure GaugeSpring Loaded Type Safety ValveSG ValveSG ValveFuse PlugPressure GaugePressure GaugePressure GaugeSG ValveFuse PlugPressure GaugePressure Gauge30Attachments·SpecificationShape·MaterialShapeShape·MaterialDynac ValveH Seriesthe other SeriesSuper High FlowHigh FlowInside & Outside SurfacesZinc Paint CoatingmentUltraPulse Damper (IN-LINE Type)High FlowU Standard MaterialInside SurfaceOutside SurfaceInside SurfaceZinc Zinc Paint CoatingPhosphate TreatmentPhosphate TreatmentRemarks· For J series 0.03 L accumulators are made of anodized aluminum.· For standard products in the A, H, J, N, R, and Y series, the inner and outer surfaces are free of painting and treated by chemical conversion coating.· Inner surface coating is unsuitable when using fire resistant fluids that may cause the paint to peel off, such as phosphate ester based fluids and water glycol fluids.SG ValveSpring Loaded Type Safety ValvePressure GaugeSG ValveFuse PlugCore Type Gas ValvePressure GaugeQRADPAMCXX–ADBADCEGFYMNQ––QRVTSCDA–B–NWHLXSpecial Specifi-cationSuper Pulse Damper (IN-LINE Type)Outside SurfaceInside & Outside SurfacesPaint CoatingPlatingShapeMaterial of ButtonSpecial SpecificationStandard J Series OnlyCarbon SteelStainless SteelAluminumImageSpecial Stainless SteelSpecification

元のページ  ../index.html#31

このブックを見る