NACOL-E_2024_01
28/130

①Inspection·Standard⑧Specifications for Accumulator Shell⑤Nominal Gas Volume④Maximum Allowable Working Pressure②Bladder Compound⑦Specifications For Oil Port Side⑥Specifications For Top Cap & Gas Charging Side ①Inspection·StandardSelect the item number code corresponding to applicable legal requirements. Note that some models may neither be covered by nor support the standards.In Japan, products used in food processing applications are subject to the Food Sanitation Act.For accumulators meeting other inspection/standard requirements or if you have any questions, please contact us.CountryJAPANJAPANJAPANU.S.A.CANADAOverlandEUCHINAAUSTRALIAMALAYSIAOther High Pressure Gas Safety Law, Japan (Authorized Product by Ministry of Economy, Trade and Industry of Japan)Application: Accumulators for pressure higher than 1 MPa inclusive, regardless of the gas Related Organization: Ministry of Economy, Trade and Industry / Metropolitan/prefectural High Pressure Gas Safety Law, Japan (Special Facilities)Application: Vessel connected to accumulator by piping etc. (Backup bottle)Related Organization: Ministry of Economy, Trade and Industry / Metropolitan/prefectural Industrial Safety and Health Act, Japan (Class-2 Pressure Vessel)Application: Accumulators containing gas higher than 0.2 MPa and the volume more than Related Organization: Labor Standards Inspection Office, Ministry of Health, Labour and ASME (ASME Boiler and Pressure Vessel Code Section VIII Div.1)Application: Accumulators with an inside diameter more than 152 mm and a pressure Related Organization: N.B. (NATIONAL BOARD)B51 (Boiler, Pressure Vessel, and Pressure Piping Code)ASME (ASME Boiler and Pressure Vessel Code Section VIII Div.1)Application: Accumulators with an inside diameter more than 152 mm and a pressure Related Organization: Minister of Consumer and Commercial RelationsP.E.D.(97/23/EC)Application: Accumulators with a maximum allowable working pressure exceeding 0.5 bar Related Organization: CEN (European Committee for Standardization)Regulation for Production and Filling Licensing of Special EquipmentApplication: AccumulatorsRelated Organization: State Administration for Market RegulationAS 1210 (AUSTRARIAN STANDARD)Application: Accumulators with a design pressure exceeding 50 kPaRelated Organization: Health and safety authority in the relevant Australian stateFACTORIES AND MACHINERY ACTApplication: All accumulatorsRelated Organization: Malaysia GovernmentNACOL (manufacturer's) Inspectionvolume.governmentgovernment40 LWelfareexceeding 100 kPaexceeding 100 kPaand nominal gas volume exceeding 1 Liter·METI License No.:MAB-374-E (Accumulator, MAB-374-N) Valve·ASME Certificate No.: 12594·When ordering an accumulator, specify the customer's name and address as well as the name and address of installation in English, which will be included in a data report.·For use in Canada, type approval from the relevant provincial government is required.·When using an accumulator not covered by the ASME Code in Canada, please contact us in advance.·CE marking: CE0035·CE marked accumulators conforming to the Pressure Equipment Directive (P.E.D.).·These accumulators can circulate freely in Europe.·License No.: TS2200143·Unless otherwise specified, the ASME or JIS design code applies.·When ordering an accumulator, specify the name and address of installation in English or Chinese, which will be included in an inspection certificate.·"Supervisory Inspection for Safety Performance of the Products", which may be required after arrival in China, is not supported. It is the responsibility of the exporter to undergo the Inspection at the landing place in China. Please contact us for more information.·When you export our products to China, please contact us in advance.·Design registration is required in the state in which the accumulator will be installed.·When ordering an accumulator, specify the name and address of installation in English.·These accumulators have passed pressure testing according to internal standards, but do not meet legal requirements.IntroductionExplanation of Item Number for Accumulator27SymbolAreaSeriesInspection·RegulationRemarksThread Specification of Oil Port Side or Special Specification①②-③④④-⑤⑤⑤-⑧⑨⑨⑨③⑨HPFMSRDAUN④④⑥⑦

元のページ  ../index.html#28

このブックを見る