SpareParts⑤Nominal Gas Volume⑩Button Material⑪Accessories Supplied with BladdersLL210LLLL※4LLLLLL000330005LLLLLLLLLLL06000220000LLLLLLLLLLL313512534530000LL.LLL.※4 Only for H series accumulators with an accumulator shell diameter of 355.6 mm.※7 For the A, G, H, N, R, S, U, and Y series, the bladder does not have a button; no button material designation (⑩) is required for this bladder.※8 Select stainless steel button for stainless steel accumulators.－－ AGUCS※10 Bladders for stainless steel accumulators do not come with a bladder cap. ※11 For the shapes of the SG valve and the SG coreless valve, please see the photos below. The SG coreless valve has been discontinued.Button ※5104Select the item number code corresponding to the nominal gas volume of the accumulator in use.Select the item number code corresponding to the button material suitable for the volume, maximum allowable working pressure, and material of the accumulator in use.※5 The button is made of a metal plate (material listed below) and located at the bladder bottom.※6 Water glycol fluids and some phosphate ester based fluids cannot be used for accumulators having bladders with an aluminum button. For more information, please contact us or the fluid manufacturer.Select the item number code corresponding to the gas charging side specifications of the accumulator in use.※9 Bladders come with an O-ring, etc., required for replacement. Accessories vary depending on the accumulator. For accumulators with a separate type top cap, please check the bladder back up ring in use before ordering a new bladder. Please reuse the bladder back up ring if no abnormality is found. If any damage or deformation has been found, order a new bladder and bladder back up ring for replacement.For stainless steel accumulators, please check the bladder cap in use before ordering a new bladder. Please reuse the bladder cap if no abnormality is found. If any damage, deformation, or rust has been found, order a new bladder and bladder cap for replacement.SymbolNominal Gas volume0LLLLL2LLL60.030.10.30.5122.53456.3Symbol0.03 – 0.5 LA1735CU16SymbolAccumulator with Dynac ValveAccumulator with SG valveStainless Steel AccumulatorAccumulator with Core Type Gas Charging ValveAccumulator with SG Coreless ValveNo SymbolOnly Bladder※ Bladder Cap comes with bladders of 20 L or bigger (Except for Stainless Steel Accumulator)SG ValveSymbolNominal Gas volume1L1LL2R2L3L3R3L4R4Y45L101620203032324040405017.5 MPa 1 – 5 LStandard (Material: Aluminum)Stainless SteelApplicationSG Coreless Valve (Old Model)SymbolNominal Gas volumeR5L6Y6L6R6L821611725 MPa 1 – 5 LStandard (Material: Carbon Steel)O-ring for Top Cap and O-ring for Gas Charging Valve (Bladder Cap)O-ring for Top Cap, O-ring for Gas Charging Valve, O-ring for connection port of SG valve and Top Cap, and O-ring for Pressure Gauge (Bladder Cap)O-ring for Top Cap and O-ring for Gas Charging ValveO-ring for Top Cap and O-ring for Gas Charging Valve, (Bladder Cap), Core, Core Rotator, (Valve Cap)O-ring for Top Cap and O-ring for Gas Charging Valve (Bladder Cap), Seal Washer (W30,W8S1)None506060636380120145 – 160175AccessoriesGas volume of S series are as follows.SymbolNominal Gas volumeLL0.10.6
元のページ ../index.html#105